Window Replacement & Installation in Long Lake, MN
Long Lake homeowners near the shores of Lake Minnetonka, the historic downtown, and the established neighborhoods along Highway 12 trust Lakeside Exteriors for window replacement that respects the character of their home. With older lakeshore cottages, mid-century builds, and traditional residential homes all within a few blocks of each other, we bring the product knowledge and install quality each style requires — with Marvin, Andersen, Pella, and ProVia products installed by experienced crews who know what older and lake-adjacent homes demand.
Long Lake Window Installs That Feel Better Right Away
Long Lake is one of the quieter, more character-rich communities on the west end of Lake Minnetonka, and the window replacement work here is different from a standard suburban job. Older lakeshore cottages, traditional two-stories near downtown, and homes that have gone through multiple renovation generations all have specific needs in profile, sizing, and finish that a contractor handling cookie-cutter subdivisions every day simply isn't set up for.
Lakeside Exteriors is Long Lake's trusted window contractor. We measure every opening individually, source the right product from Marvin, Andersen, Pella, and ProVia, and install with the trim finish and attention to detail that a home like yours deserves. The goal is a replacement that performs significantly better than what it replaced and looks like it was always supposed to be there.
What Long Lake Homeowners Notice With Aging Windows
Long Lake's housing stock includes some of the west metro's oldest and most architecturally distinct homes, and the window problems here tend to be more complex than a typical replacement job. They show up in ways that require more care to fix correctly.
-
Non-standard window openings from original construction that don't accept off-the-shelf replacement sizes
-
Original wood windows with paint failure, swollen frames, and sills that show rot when probed
-
Homes near Shady Oak Lake with lake humidity adding to moisture damage around older window frames
-
Cold infiltration that is worst in the kitchen and bathroom — rooms where ventilation windows were often the lowest quality
-
Previous replacement attempts that used insert-only methods, leaving the original deteriorated frame in place
We work with Marvin and Andersen product lines specifically designed for older and lakeshore homes, with the right profiles, interior wood options, and finish configurations to match the period and setting of your home without sacrificing the energy performance you need in a Minnesota winter.
Get a free estimate for Long Lake window installation service
Clear quote. Clean install. Final walkthrough.
.jpg)
Our Quality Install Process
Replacing windows in a Long Lake home requires more preparation and care than a standard suburban replacement. Our process is organized, thorough, and built around the specific needs of older and lakeshore construction.
Measure + Plan The Install
We measure every opening individually. Historic and non-standard sizes are common in Long Lake homes and can't be assumed from one window to the next. We confirm the right product, profile match, sourcing timeline, and installation plan before anything is ordered. You get a detailed written quote before work begins.
Install With Craftsmanship
Our crew removes the old unit, inspects the rough opening for rot or moisture damage that is common in older Long Lake construction, adds insulation, and sets the new window square, secure, and sealed. Interior and exterior trim is finished carefully. It should look like the window belongs, not like a replacement was done last spring.
Finish + Final Walkthrough
We check operation, locks, and fit on every unit, review the finished look inside and out, and answer every question before we leave. You test each window yourself so you feel fully confident in the install before we wrap up.
Our installers work throughout Long Lake and follow local building requirements for residential window replacement, including egress, tempered glass near stairways, and insulation standards for Minnesota homes.
Premium Window Brands, Installed with Craftsmanship
.webp)
%20(1).webp){kind=logo}
%20(1).webp)
%20(1).webp)
We install Marvin, Andersen, Pella, and ProVia windows for Long Lake homeowners who want long-term performance without compromising the character of their home. For older and lakeshore properties, we recommend Marvin Signature and Andersen A-Series — both offer custom sizing, interior wood configurations, and exterior finish options that older Long Lake homes require.
Great windows work best when the install is done right.
Long Lake's housing stock spans well over a century, from early lakeshore cottages and traditional homes near the historic downtown to mid-century builds and larger custom properties closer to the water. Each type has different window needs, and the common thread is that standard replacement options designed for newer suburban track homes rarely fit correctly or look right in a home with genuine character.
Profile matters here. A lakeshore cottage has specific proportions and sightline details that define how the windows look from the water and from the street. A traditional two-story near downtown has its own trim profiles and muntin patterns that a wrong replacement works against immediately. Getting the wrong unit, even a high-quality one in the wrong profile, creates a visual mismatch that affects the whole character of the home. We take this seriously on every Long Lake project.
We specialize in installations designed for Long Lake's varied housing character:
-
Historic profile matching — Marvin and Andersen both offer product lines with sightlines, muntin options, and exterior finish configurations appropriate for older Long Lake construction
-
Custom and non-standard sizing — older Long Lake construction frequently has opening dimensions that don't match modern standard sizes; we source to fit correctly
-
High-performance glass for lake exposure — Low-E coatings and argon fill selected for the UV load, humidity, and west and south-facing lake properties experience
-
Wood interior options — for homes where the interior window profile is part of the architectural finish, we source the right interior wood species and configuration
-
Rough opening repair included — older homes commonly have rot or moisture damage in the rough opening that needs to be addressed before the new window goes in; we include this in the scope, not as a surprise add-on
-
Triple-pane options for Highway 12 corridors — for homes where road noise is a real concern, we offer triple-pane glass that makes a noticeable difference
Serving Every Corner of Long Lake
Long Lake is a small, close-knit community with a lot of architectural variety packed into a tight area. Homes near the historic downtown sit on older lots with original construction, lakeshore properties along the north end deal with UV exposure and humidity that accelerates window wear, and neighborhoods further from the water tend to be a mix of mid-century and traditional builds. Lakeside Exteriors works with Long Lake homeowners across the whole community and understands what each area's housing character demands.
Areas in and around Long Lake we regularly serve include:
-
Historic downtown Long Lake — older homes where profile matching and careful trim work are non-negotiable
-
Lake Minnetonka shoreline — lakeshore and near-shore properties where UV, wind, and humidity stress accelerate window wear on west and south-facing elevations
-
Highway 12 corridor neighborhoods — established residential streets where noise reduction glass is worth the conversation
-
Surrounding Long Lake communities — including Orono, Wayzata, Minnetonka Beach, and Navarre where many homeowners work with us across community lines
Local Window Installation Service Based in Long Lake, MN
Frequently Asked Questions About Window Replacement in
Long Lake, MN
Can Lakeside Exteriors match historic window profiles in older Long Lake homes?
This is one of the most common things addressed on Long Lake projects. Lakeside Exteriors works with Marvin Signature, Marvin Ultimate, and Andersen A-Series specifically because those product lines offer the sightline proportions, muntin configurations, and exterior finish options appropriate for older Long Lake construction. Every opening is measured individually and the profile is confirmed before anything is ordered. A replacement window that doesn't match the architectural character of the home creates a visual problem that's hard to undo.
What window brands does Lakeside Exteriors recommend for a Long Lake home?
For older and lakeshore Long Lake homes, Marvin Signature and Andersen A-Series are the primary recommendations. Both offer authentic profiles, wood interior options, and the custom sizing range that older construction requires. For lakeshore properties where the priority is lake-facing performance and views, Marvin Ultimate and Pella Architect Series are also considered depending on the specific configuration needed.
How does a homeowner know if their Long Lake home needs full-frame replacement or just new glass?
If the frame shows any rot or softness when probed at the sill, has shifted out of square, or if there is moisture staining in the surrounding trim or drywall, full-frame replacement is almost always the right call. In older Long Lake homes, rot that is visible at the surface has typically worked further into the rough opening than it appears. Lakeside Exteriors inspects every opening during the estimate visit and gives an honest assessment with no upselling — just what the opening actually needs.
Does Lakeside Exteriors handle permits for window replacement in Long Lake?
Most standard replacement projects don't require a permit, but projects that involve changing opening sizes or adding egress windows do. Lakeside Exteriors reviews the scope during the estimate and handles the permit process when one is required, including submitting paperwork and scheduling any required inspections with the City of Long Lake.
How long does window replacement take in a Long Lake home?
Standard replacements from in-stock inventory are typically done in one to two days. Historic or custom-sized units that need to be factory-ordered carry a lead time of two to six weeks depending on the product line, which Lakeside Exteriors confirms during the estimate appointment. One project manager handles the job from estimate through final walkthrough so you always know exactly where the project stands.
Can a homeowner replace just a few windows now and do the rest later?
Yes. Phased replacement is a practical approach for Long Lake homes where some windows are actively failing while others are still holding up. Lakeside Exteriors identifies which openings are in the worst condition during the initial walkthrough and gives a prioritized list so the most critical ones get addressed first. There's no pressure to replace everything at once, and phasing over time often makes more sense for larger or more complex projects.
Get a free estimate for Long Lake window installation service
Long Lake homes deserve a window contractor who understands what the work requires — the right product, the right profile, and an installation that holds up to Lake Minnetonka conditions for decades. Lakeside Exteriors is the trusted window replacement contractor for Long Lake homeowners who want the job done right the first time. Whether you need two windows replaced or a full home project sourced and installed, we give you the honesty, craftsmanship, and communication you deserve.